concplot.ps no found! (Rookie, newcomer)

[Fcojavierbz]

I am modeling a sandstorm emission, I get to do the model with data from reanalysis (if you known better data... please) but, when I run display, I get that not found concplot.ps, I really need help.

[ariel.stein]

We will need more information in order to help you. Please describe how are you performing the runs.

[Fcojavierbz]

We will need more information in order to help you. Please describe how are you performing the runs.

. well, I try display the product of the similation of a duststorm in south america, but after the run the model, I found this problem ( I follow all the steps of the simulation in ***https://ready.arl.noaa.gov/documents/Tu ... _dust.html***). Additionally try using CONCENTRATION/SPECIALRUNS/DUST STORM, but I got the same result.

[ariel.stein]

Can you please send me your CONTROL and SETUP.CFG files?

[Fcojavierbz]

Can you please send me your CONTROL and SETUP.CFG files?

Yes, this is the work..
This is

14 07 23 10
10
-13.55 -75.52 10.0 -1.0 6.0E+08
-13.59 -76.10 10.0 -1.0 6.0E+08
-14.05 -76.12 10.0 -1.0 6.0E+08
-14.25 -75.57 10.0 -1.0 6.0E+08
-14.38 -75.47 10.0 -1.0 6.0E+08
-14.44 -75.37 10.0 -1.0 6.0E+08
-14.48 -75.28 10.0 -1.0 6.0E+08
-14.57 -75.25 10.0 -1.0 6.0E+08
-15.25 -74.50 10.0 -1.0 6.0E+08
-15.31 -74.42 10.0 -1.0 6.0E+08
30
0
10000.0
1
C:\hysplit4\working/
RP201407.gbl
1
PM10
0.0
30.0
00 00 00 00 00
1
0.0 0.0
0.05 0.05
30.0 30.0
./
dust1.bin
1
100
00 00 00 06 00
00 00 00 00 00
00 24 00
1
0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0
0.0
0.0

[Fcojavierbz]

Can you please send me your CONTROL and SETUP.CFG files?

###CONTROL###
14 07 23 10
29
-13.59 -76.10 10. -1.000 0.205E+10
-13.59 -76.08 10. -1.000 0.205E+10
-13.59 -76.06 10. -1.000 0.205E+10
-13.59 -76.04 10. -1.000 0.205E+10
-13.59 -76.02 10. -1.000 0.205E+10
-13.59 -76.00 10. -1.000 0.205E+10
-13.59 -75.98 10. -1.000 0.205E+10
-13.59 -75.96 10. -1.000 0.205E+10
-13.59 -75.94 10. -1.000 0.205E+10
-13.59 -75.92 10. -1.000 0.205E+10
-13.59 -75.90 10. -1.000 0.205E+10
-13.59 -75.88 10. -1.000 0.205E+10
-13.59 -75.86 10. -1.000 0.205E+10
-13.59 -75.84 10. -1.000 0.205E+10
-13.59 -75.82 10. -1.000 0.205E+10
-13.59 -75.80 10. -1.000 0.205E+10
-13.59 -75.78 10. -1.000 0.205E+10
-13.59 -75.76 10. -1.000 0.205E+10
-13.59 -75.74 10. -1.000 0.205E+10
-13.59 -75.72 10. -1.000 0.205E+10
-13.59 -75.70 10. -1.000 0.205E+10
-13.59 -75.68 10. -1.000 0.205E+10
-13.59 -75.66 10. -1.000 0.205E+10
-13.59 -75.64 10. -1.000 0.205E+10
-13.59 -75.62 10. -1.000 0.205E+10
-13.59 -75.60 10. -1.000 0.205E+10
-13.59 -75.58 10. -1.000 0.205E+10
-13.59 -75.56 10. -1.000 0.205E+10
-13.59 -75.54 10. -1.000 0.205E+10
30
1
1000.0
1
C:\hysplit4\working/
RP201407.gbl
./
1PM10
###SETUP###
&SETUP
tratio = 0.75,
initd = 0,
kpuff = 0,
khmax = 9999,
kmixd = 0,
kmix0 = 250,
kzmix = 0,
kdef = 0,
kbls = 1,
kblt = 2,
conage = 48,
numpar = 2500,
qcycle = 4.0,
efile = '',
tkerd = 0.18,
tkern = 0.18,
ninit = 1,
ndump = 0,
ncycl = 0,
pinpf = 'PARINIT',
poutf = 'PARDUMP',
mgmin = 10,
kmsl = 0,
maxpar = 10000,
cpack = 1,
cmass = 0,
dxf = 1.0,
dyf = 1.0,
dzf = 0.01,
ichem = 3,
p10f = 1.0,
kspl = 1,
krnd = 6,
frhs = 1.0,
frvs = 0.01,
frts = 0.1,
frhmax = 3.0,
splitf = 1.0,
/

[ariel.stein]

OK, it seems that the model run correctly but the friction velocity in the meteorological file did not exceed the threshold to start the dust emission (can you share your MESSAGE file so we can confirm that?). This happens when you are using very coarse meteorological data. Please try with the GDAS dataset.

[Fcojavierbz]

I tried this (20140723_gdas0p5) but then it's what happened, Run the model and I'm waiting for HOURS ... AND NOTHING HAPPENS.
###CONTROL###
14 07 23 10
10
-13.55 -75.00 10.0 -1.0 6.0E+08
-13.59 -75.05 10.0 -1.0 6.0E+08
-14.05 -75.10 10.0 -1.0 6.0E+08
-14.25 -75.20 10.0 -1.0 6.0E+08
-14.45 -75.50 10.0 -1.0 6.0E+08
-14.65 -75.70 10.0 -1.0 6.0E+08
-14.85 -75.90 10.0 -1.0 6.0E+08
-15.00 -76.00 10.0 -1.0 6.0E+08
-15.25 -76.10 10.0 -1.0 6.0E+08
-15.50 -76.50 10.0 -1.0 6.0E+08
30
0
1000.0
2
C:/hysplit4/working/
20140723_gdas0p5
C:/hysplit4/working/
RP201407.gbl
./
1PM10
####SETUP####
&SETUP
tratio = 0.75,
initd = 0,
kpuff = 0,
khmax = 9999,
kmixd = 0,
kmix0 = 250,
kzmix = 0,
kdef = 0,
kbls = 1,
kblt = 2,
conage = 48,
numpar = 2500,
qcycle = 4.0,
efile = '',
tkerd = 0.18,
tkern = 0.18,
ninit = 1,
ndump = 0,
ncycl = 0,
pinpf = 'PARINIT',
poutf = 'PARDUMP',
mgmin = 10,
kmsl = 0,
maxpar = 10000,
cpack = 1,
cmass = 0,
dxf = 1.0,
dyf = 1.0,
dzf = 0.01,
ichem = 3,
p10f = 1.0,
kspl = 1,
krnd = 6,
frhs = 1.0,
frvs = 0.01,
frts = 0.1,
frhmax = 3.0,
splitf = 1.0,
/

[ariel.stein]

Your CONTROL file might have a problem. See after you define the meteorological files
C:/hysplit4/working/
20140723_gdas0p5
C:/hysplit4/working/
RP201407.gbl

you put a ./ instead of a 1 to set the number of pollutants.


14 07 23 10
10
-13.55 -75.00 10.0 -1.0 6.0E+08
-13.59 -75.05 10.0 -1.0 6.0E+08
-14.05 -75.10 10.0 -1.0 6.0E+08
-14.25 -75.20 10.0 -1.0 6.0E+08
-14.45 -75.50 10.0 -1.0 6.0E+08
-14.65 -75.70 10.0 -1.0 6.0E+08
-14.85 -75.90 10.0 -1.0 6.0E+08
-15.00 -76.00 10.0 -1.0 6.0E+08
-15.25 -76.10 10.0 -1.0 6.0E+08
-15.50 -76.50 10.0 -1.0 6.0E+08
30
0
1000.0
2
C:/hysplit4/working/
20140723_gdas0p5
C:/hysplit4/working/
RP201407.gbl
./ < -------- here is the problem (it should be a 1 here)
1PM10

[Fcojavierbz]

Thank you for you help, I change the ./ directly in the CONTROL archive, but this doesn´t work. I´ve try to do a deposition definition for pollutant (Set simple-particles or gas ##Particles/default settings##/Dry deposition##yes/default settings###/wet deposition##No##) and a Pollutant = identification/1PM10; Emission rate/ 1; hours of emission/4; realease start /14 07 23 10 00 and get the same results. ####Simulation parameters undefined - execute setup first!###. I dont know what to do.