Help with script

[tschonholz]

Hi, I'm trying to run the model for a volcanic ash experiment through MS-DOS so I created a .bat file.
Everything runs correctly, but I cannot figure out how to plot all the species into a single plot.

This is my script:
echo 11 06 04 18 >CONTROL
echo 2 >>CONTROL
echo -40.5 -72 2240 >>CONTROL
echo -40.5 -72 6000 >>CONTROL
echo 24 >>CONTROL
echo 0 >>CONTROL
echo 15000.0 >>CONTROL
echo 1 >>CONTROL
echo C:/hysplit4/working/ >>CONTROL
echo MET_20110605.arl >>CONTROL
echo 4 >>CONTROL
echo p006 >>CONTROL
echo 0.008E+16 >>CONTROL
echo 48.0 >>CONTROL
echo 11 06 04 12 00 >>CONTROL
echo p020 >>CONTROL
echo 0.068E+16 >>CONTROL
echo 48.0 >>CONTROL
echo 11 06 04 12 00 >>CONTROL
echo p060 >>CONTROL
echo 0.250E+16 >>CONTROL
echo 48.0 >>CONTROL
echo 11 06 04 12 00 >>CONTROL
echo p200 >>CONTROL
echo 0.670E+16 >>CONTROL
echo 48.0 >>CONTROL
echo 11 06 04 12 00 >>CONTROL
echo 1 >>CONTROL
echo -40.5 -72.0 >>CONTROL
echo 0.25 0.25 >>CONTROL
echo 90.0 180.0 >>CONTROL
echo ./ >>CONTROL
echo cdump >>CONTROL
echo 3 >>CONTROL
echo 6096 10668 16764 >>CONTROL
echo 11 06 04 18 00 >>CONTROL
echo 00 00 00 00 00 >>CONTROL
echo 00 06 00 >>CONTROL
echo 4 >>CONTROL
echo 0.6 2.5 1.0 >>CONTROL
echo 0 0.0 0.0 0.0 0.0 >>CONTROL
echo 0.0 0.0 0.0 >>CONTROL
echo 0 >>CONTROL
echo 0.0 >>CONTROL
echo 2.0 2.5 1.0 >>CONTROL
echo 0 0.0 0.0 0.0 0.0 >>CONTROL
echo 0.0 0.0 0.0 >>CONTROL
echo 0 >>CONTROL
echo 0.0 >>CONTROL
echo 6.0 2.5 1.0 >>CONTROL
echo 0 0.0 0.0 0.0 0.0 >>CONTROL
echo 0.0 0.0 0.0 >>CONTROL
echo 0 >>CONTROL
echo 0.0 >>CONTROL
echo 20.0 2.5 1.0 >>CONTROL
echo 0 0.0 0.0 0.0 0.0 >>CONTROL
echo 0.0 0.0 0.0 >>CONTROL
echo 0 >>CONTROL
echo 0.0 >>CONTROL

\hysplit4\exec\hycs_std
rem \hysplit4\exec\concplot -icdump -opuyehue


echo 'TITLE^&','Concentration^&' >LABELS.CFG
echo 'MAPID^&','Values ^&' >>LABELS.CFG
echo 'UNITS^&','ug%^&' >>LABELS.CFG
echo 'VOLUM^&','&' >>LABELS.cfg



\hysplit4\exec\concplot -icdump -opuyehue_2 -d1 -u -z80 -c4 -v20+10+5+2+1+0.5+0.2+0.1

puyehue_2.ps

The label I get on my graph is p006 release started at 1200 04 jun 11 (UTC) and I want it to be all of the species, not only p006.
Can anyone help?

Thanks!

[barbara.stunder]

concplot ... -s0 (zero) will sum the concentrations from the multiple particle sizes ("pollutants").


\hysplit4\exec\concplot without any command line switches will show all the command line options

[tschonholz]

Thank you. Do I have any way to choose the colors for plotting? because the option k is not so clear for me.

[barbara.stunder]

When plotting concentrations the -k option sets color vs. black & white, and uses contour lines or not. With the -v option, specific colors can be chosen. See examples with concplot ... -v in the file xrun.bat or xrun.scr in the folder 'testing' (c:\hysplti4\testing).

[tschonholz]

I got to plot it, but not to choose the colors. The v seems to be only for values to contour, not to choose colors.
When I don't set those contours I get some colors, when I set them, others. I was wondering if there was a way to plot it and choosing colors. If no possible, I'll do it with GraDs. Thanks!

[barbara.stunder]

concplot using -v with the -c4 option:

-v[Values (:labels:colors are optional) for up to 10 fixed contours: val1+val2+...val10]

If the contour values are user set (-c4), then it is also possible to define up to ten individual contours explicitly through this option. For instance -v4+3+2+1, would define the contours 4, 3, 2, and 1. Optionally, a label and/or color (RGB) can be defined for each contour (e.g. -v4:LBL4:000000255+3:LBL3:000255255+2:LBL2:051051255+1:LBL1:255051255). To specify a color but not a label, two colons must be present (e.g. -v4::000000255).

[tschonholz]

Thank you. It doesn't seem to take the value+color code.
Can this have to do that I'm using non entire values?
I have it this way:

\hysplit4\exec\concplot -icdump -opuyehue -d2 -s0 -u -z80 -c4 -v0.4E-02::000000255+0.2E-02::000255255+0.1E-02::051051255+0.1E-03::255051255+0.1E-04::255000000


the command prompt window complains about an error.
Thanks for your help.

[barbara.stunder]

I ran this command and it works. The basic plot such as concplot -icdump -s0 works, right? What is the error message you get? Possibly get the current version, but I don't think that is the issue - either Advanced - Scan for updates, or download it from our web page.

[tschonholz]

Sorry, I just came back from a nowcasting training course. I remember it was an error, weird one.
How can I check which version I have? I checked for updates and it says there are no new versions.
Thanks!

[ormitamedia]

solve