ERROR: BlueSky module fuelbeds failed

Post any defects you find in the HYSPLIT software here. The HYSPLIT Developers carefully monitor this list and will work diligently to repair any reported problems. When posting a bug report, please specify both the HYSPLIT version and operating system you are using.
Post Reply
meteo
Posts: 4
Joined: August 10th, 2018, 3:54 pm
Registered HYSPLIT User: No

ERROR: BlueSky module fuelbeds failed

Post by meteo »

I have a problem and I can't find an address to solve it

This is not a NOAA product. It was produced by: emergenciascig
Meteorology: 0000Z 15 Sep 2024 - GFS0p25
Dry Deposition rate: 0 cm/s Wet Removal: None #Part: -10000
Pollutant Averaging/Integration Period: 1 hrs and 0 min
Release Quantity: 1 g Start: 24 09 17 8 0 Duration: 48 hrs, 0 min
Pollutant: PM2.5 - Unspecified
Release: lat.: -27.800210 lon.: 58.183594 Hgt: 0 m
Job ID: 28441 Job Start: Sun Sep 15 09:29:31 UTC 2024

Sun Sep 15 05:29:35 EDT 2024

******************************************************************************
The model has crashed. Check the HYSPLIT Message file for further information.
******************************************************************************

hycs_std 0000000000405029 Unknown Unknown Unknown
libc-2.17.so 00007FC3272F9555 __libc_start_main Unknown Unknown
hycs_std 0000000000405122 Unknown Unknown Unknown
hycs_std 000000000040ACC2 Unknown Unknown Unknown
hycs_std 00000000004E8889 Unknown Unknown Unknown
hycs_std 0000000000565775 Unknown Unknown Unknown
hycs_std 0000000000566A51 Unknown Unknown Unknown
hycs_std 000000000053B13B Unknown Unknown Unknown
Image PC Routine Line Source
forrtl: severe (59): list-directed I/O syntax error, unit -5, file Internal List-Directed Read
NOTICE main: using namelist file - SETUP.28441
Last Changed Date: 2024-02-01
HYSPLIT version: hysplit.v5.3.2
HYSPLIT - Initialization 28441
Model submitted on Sun Sep 15 05:29:35 EDT 2024
cat: control_src_28441: No such file or directory
type: RuntimeError
traceback: [' File "fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
message: Failed to lookup fuelbeds information for loc -27.80021, 58.183594

******************************************************************************
BLUESKY ERROR BLUESKY ERROR BLUESKY ERROR
******************************************************************************

The fire location is over a large body of water.
Check the latitude and the longitude.

******************************************************************************

05:29:32 ERROR: BlueSky module fuelbeds failed. See below for the details.
[' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
Failed to lookup fuelbeds information for loc -27.80021, 58.183594
Failed to lookup fuelbeds information for loc -27.80021, 58.183594
05:29:32 INFO: Running BlueSky module fuelbeds ...
05:29:32 INFO: localmet not selected for estimating fuel moisture
05:29:32.386 INFO - Changing BlueSky config to use 1 dominant fuelbeds
05:29:32.386 INFO - Setting default BlueSky config
05:29:32.386 INFO - timezone is Etc/GMT-4 at lat=-27.80021, lon=58.183594
05:29:32.369 INFO - This is BlueSky adaptor version 0.1.5
05:29:32.366 INFO - Running prep_bluesky_inp.py...
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-18
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-17
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-16
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-15
05:29:32.135 INFO - Running prep_bluesky_met.py...
This is run_bluesky.sh [Sun Sep 15 05:29:31 EDT 2024]
Captura de pantalla 2024-09-20 222643.png
Last edited by meteo on September 20th, 2024, 9:32 pm, edited 1 time in total.
sonny.zinn
Posts: 373
Joined: May 8th, 2019, 1:31 pm
Registered HYSPLIT User: Yes

Re: ERROR: BlueSky module fuelbeds failed

Post by sonny.zinn »

According to the error message, the fire location you entered is over a large body of water, more specifically, somewhere in the Indian Ocean. Please check the latitude and longitude coordinates of your fire location.
meteo
Posts: 4
Joined: August 10th, 2018, 3:54 pm
Registered HYSPLIT User: No

Re: ERROR: BlueSky module fuelbeds failed

Post by meteo »

I check the latitude and longitude
Captura de pantalla 2024-09-20 222643.png
coordinates of my fire location, and it is correct.Image
It is Argentina
Fri Sep 20 21:24:24 EDT 2024
******************************************************************************
The model has crashed. Check the HYSPLIT Message file for further information.
******************************************************************************

hycs_std 0000000000405029 Unknown Unknown Unknown
libc-2.17.so 00007FAB37EFE555 __libc_start_main Unknown Unknown
hycs_std 0000000000405122 Unknown Unknown Unknown
hycs_std 000000000040ACC2 Unknown Unknown Unknown
hycs_std 00000000004E8889 Unknown Unknown Unknown
hycs_std 0000000000565775 Unknown Unknown Unknown
hycs_std 0000000000566A51 Unknown Unknown Unknown
hycs_std 000000000053B13B Unknown Unknown Unknown
Image PC Routine Line Source
forrtl: severe (59): list-directed I/O syntax error, unit -5, file Internal List-Directed Read
NOTICE main: using namelist file - SETUP.28848
Last Changed Date: 2024-02-01
HYSPLIT version: hysplit.v5.3.2
HYSPLIT - Initialization 28848
Model submitted on Fri Sep 20 21:24:24 EDT 2024
cat: control_src_28848: No such file or directory
type: RuntimeError
traceback: [' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
message: Failed to lookup fuelbeds information for loc -28.594168, -60.974121

******************************************************************************
BLUESKY ERROR BLUESKY ERROR BLUESKY ERROR
******************************************************************************

The fire location is over a large body of water.
Check the latitude and the longitude.

******************************************************************************

21:24:23 ERROR: BlueSky module fuelbeds failed. See below for the details.
[' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
Failed to lookup fuelbeds information for loc -28.594168, -60.974121
Failed to lookup fuelbeds information for loc -28.594168, -60.974121
21:24:23 INFO: Running BlueSky module fuelbeds ...
21:24:23 INFO: localmet not selected for estimating fuel moisture
21:24:23.801 INFO - Changing BlueSky config to use 1 dominant fuelbeds
21:24:23.801 INFO - Setting default BlueSky config
21:24:23.800 INFO - timezone is America/Argentina/Cordoba at lat=-28.594168, lon=-60.974121
21:24:23.688 INFO - This is BlueSky adaptor version 0.1.5
21:24:23.685 INFO - Running prep_bluesky_inp.py...
21:24:23.503 INFO - Creating file metdata.csv for 2024-09-23
21:24:23.503 INFO - Creating file metdata.csv for 2024-09-22
21:24:23.502 INFO - Creating file metdata.csv for 2024-09-21
21:24:23.502 INFO - Creating file metdata.csv for 2024-09-20
21:24:23.471 INFO - Running prep_bluesky_met.py...
This is run_bluesky.sh [Fri Sep 20 21:24:23 EDT 2024]
sonny.zinn
Posts: 373
Joined: May 8th, 2019, 1:31 pm
Registered HYSPLIT User: Yes

Re: ERROR: BlueSky module fuelbeds failed

Post by sonny.zinn »

BlueSky's fuelbed database covers the conterminous U.S., Alaska, and Canada. It will not work with a location in Argentina.
meteo
Posts: 4
Joined: August 10th, 2018, 3:54 pm
Registered HYSPLIT User: No

Re: ERROR: BlueSky module fuelbeds failed

Post by meteo »

Thank you so much. Previously I worked in Argentina with Burned Areas and it worked very well. I understand that it currently doesn't work anymore. Is there a product I can use for this? Thank you so much.
Captura de pantalla 2024-09-25 133506.png
meteo
Posts: 4
Joined: August 10th, 2018, 3:54 pm
Registered HYSPLIT User: No

Re: ERROR: BlueSky module fuelbeds failed

Post by meteo »

Hello, currently the Prescribed Burn areas model in Argentina is not working, but before it worked very well and I used it. Can it be fixed? Thank you so much.
Imagen1.png
Post Reply

Return to “Bugs”