I have a problem and I can't find an address to solve it
This is not a NOAA product. It was produced by: emergenciascig
Meteorology: 0000Z 15 Sep 2024 - GFS0p25
Dry Deposition rate: 0 cm/s Wet Removal: None #Part: -10000
Pollutant Averaging/Integration Period: 1 hrs and 0 min
Release Quantity: 1 g Start: 24 09 17 8 0 Duration: 48 hrs, 0 min
Pollutant: PM2.5 - Unspecified
Release: lat.: -27.800210 lon.: 58.183594 Hgt: 0 m
Job ID: 28441 Job Start: Sun Sep 15 09:29:31 UTC 2024
Sun Sep 15 05:29:35 EDT 2024
******************************************************************************
The model has crashed. Check the HYSPLIT Message file for further information.
******************************************************************************
hycs_std 0000000000405029 Unknown Unknown Unknown
libc-2.17.so 00007FC3272F9555 __libc_start_main Unknown Unknown
hycs_std 0000000000405122 Unknown Unknown Unknown
hycs_std 000000000040ACC2 Unknown Unknown Unknown
hycs_std 00000000004E8889 Unknown Unknown Unknown
hycs_std 0000000000565775 Unknown Unknown Unknown
hycs_std 0000000000566A51 Unknown Unknown Unknown
hycs_std 000000000053B13B Unknown Unknown Unknown
Image PC Routine Line Source
forrtl: severe (59): list-directed I/O syntax error, unit -5, file Internal List-Directed Read
NOTICE main: using namelist file - SETUP.28441
Last Changed Date: 2024-02-01
HYSPLIT version: hysplit.v5.3.2
HYSPLIT - Initialization 28441
Model submitted on Sun Sep 15 05:29:35 EDT 2024
cat: control_src_28441: No such file or directory
type: RuntimeError
traceback: [' File "fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
message: Failed to lookup fuelbeds information for loc -27.80021, 58.183594
******************************************************************************
BLUESKY ERROR BLUESKY ERROR BLUESKY ERROR
******************************************************************************
The fire location is over a large body of water.
Check the latitude and the longitude.
******************************************************************************
05:29:32 ERROR: BlueSky module fuelbeds failed. See below for the details.
[' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
Failed to lookup fuelbeds information for loc -27.80021, 58.183594
Failed to lookup fuelbeds information for loc -27.80021, 58.183594
05:29:32 INFO: Running BlueSky module fuelbeds ...
05:29:32 INFO: localmet not selected for estimating fuel moisture
05:29:32.386 INFO - Changing BlueSky config to use 1 dominant fuelbeds
05:29:32.386 INFO - Setting default BlueSky config
05:29:32.386 INFO - timezone is Etc/GMT-4 at lat=-27.80021, lon=58.183594
05:29:32.369 INFO - This is BlueSky adaptor version 0.1.5
05:29:32.366 INFO - Running prep_bluesky_inp.py...
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-18
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-17
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-16
05:29:32.199 INFO - Creating file metdata.csv for 2024-09-15
05:29:32.135 INFO - Running prep_bluesky_met.py...
This is run_bluesky.sh [Sun Sep 15 05:29:31 EDT 2024]
ERROR: BlueSky module fuelbeds failed
ERROR: BlueSky module fuelbeds failed
Last edited by meteo on September 20th, 2024, 9:32 pm, edited 1 time in total.
-
- Posts: 373
- Joined: May 8th, 2019, 1:31 pm
- Registered HYSPLIT User: Yes
Re: ERROR: BlueSky module fuelbeds failed
According to the error message, the fire location you entered is over a large body of water, more specifically, somewhere in the Indian Ocean. Please check the latitude and longitude coordinates of your fire location.
Re: ERROR: BlueSky module fuelbeds failed
I check the latitude and longitude
It is Argentina
Fri Sep 20 21:24:24 EDT 2024
******************************************************************************
The model has crashed. Check the HYSPLIT Message file for further information.
******************************************************************************
hycs_std 0000000000405029 Unknown Unknown Unknown
libc-2.17.so 00007FAB37EFE555 __libc_start_main Unknown Unknown
hycs_std 0000000000405122 Unknown Unknown Unknown
hycs_std 000000000040ACC2 Unknown Unknown Unknown
hycs_std 00000000004E8889 Unknown Unknown Unknown
hycs_std 0000000000565775 Unknown Unknown Unknown
hycs_std 0000000000566A51 Unknown Unknown Unknown
hycs_std 000000000053B13B Unknown Unknown Unknown
Image PC Routine Line Source
forrtl: severe (59): list-directed I/O syntax error, unit -5, file Internal List-Directed Read
NOTICE main: using namelist file - SETUP.28848
Last Changed Date: 2024-02-01
HYSPLIT version: hysplit.v5.3.2
HYSPLIT - Initialization 28848
Model submitted on Fri Sep 20 21:24:24 EDT 2024
cat: control_src_28848: No such file or directory
type: RuntimeError
traceback: [' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
message: Failed to lookup fuelbeds information for loc -28.594168, -60.974121
******************************************************************************
BLUESKY ERROR BLUESKY ERROR BLUESKY ERROR
******************************************************************************
The fire location is over a large body of water.
Check the latitude and the longitude.
******************************************************************************
21:24:23 ERROR: BlueSky module fuelbeds failed. See below for the details.
[' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
Failed to lookup fuelbeds information for loc -28.594168, -60.974121
Failed to lookup fuelbeds information for loc -28.594168, -60.974121
21:24:23 INFO: Running BlueSky module fuelbeds ...
21:24:23 INFO: localmet not selected for estimating fuel moisture
21:24:23.801 INFO - Changing BlueSky config to use 1 dominant fuelbeds
21:24:23.801 INFO - Setting default BlueSky config
21:24:23.800 INFO - timezone is America/Argentina/Cordoba at lat=-28.594168, lon=-60.974121
21:24:23.688 INFO - This is BlueSky adaptor version 0.1.5
21:24:23.685 INFO - Running prep_bluesky_inp.py...
21:24:23.503 INFO - Creating file metdata.csv for 2024-09-23
21:24:23.503 INFO - Creating file metdata.csv for 2024-09-22
21:24:23.502 INFO - Creating file metdata.csv for 2024-09-21
21:24:23.502 INFO - Creating file metdata.csv for 2024-09-20
21:24:23.471 INFO - Running prep_bluesky_met.py...
This is run_bluesky.sh [Fri Sep 20 21:24:23 EDT 2024]
coordinates of my fire location, and it is correct.It is Argentina
Fri Sep 20 21:24:24 EDT 2024
******************************************************************************
The model has crashed. Check the HYSPLIT Message file for further information.
******************************************************************************
hycs_std 0000000000405029 Unknown Unknown Unknown
libc-2.17.so 00007FAB37EFE555 __libc_start_main Unknown Unknown
hycs_std 0000000000405122 Unknown Unknown Unknown
hycs_std 000000000040ACC2 Unknown Unknown Unknown
hycs_std 00000000004E8889 Unknown Unknown Unknown
hycs_std 0000000000565775 Unknown Unknown Unknown
hycs_std 0000000000566A51 Unknown Unknown Unknown
hycs_std 000000000053B13B Unknown Unknown Unknown
Image PC Routine Line Source
forrtl: severe (59): list-directed I/O syntax error, unit -5, file Internal List-Directed Read
NOTICE main: using namelist file - SETUP.28848
Last Changed Date: 2024-02-01
HYSPLIT version: hysplit.v5.3.2
HYSPLIT - Initialization 28848
Model submitted on Fri Sep 20 21:24:24 EDT 2024
cat: control_src_28848: No such file or directory
type: RuntimeError
traceback: [' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
message: Failed to lookup fuelbeds information for loc -28.594168, -60.974121
******************************************************************************
BLUESKY ERROR BLUESKY ERROR BLUESKY ERROR
******************************************************************************
The fire location is over a large body of water.
Check the latitude and the longitude.
******************************************************************************
21:24:23 ERROR: BlueSky module fuelbeds failed. See below for the details.
[' File "/home/hysplit/anaconda3/envs/bluesky-4.3/lib/python3.8/site-packages/bluesky/modules/fuelbeds.py", line 61, in run\n raise RuntimeError(msg)\n']
Failed to lookup fuelbeds information for loc -28.594168, -60.974121
Failed to lookup fuelbeds information for loc -28.594168, -60.974121
21:24:23 INFO: Running BlueSky module fuelbeds ...
21:24:23 INFO: localmet not selected for estimating fuel moisture
21:24:23.801 INFO - Changing BlueSky config to use 1 dominant fuelbeds
21:24:23.801 INFO - Setting default BlueSky config
21:24:23.800 INFO - timezone is America/Argentina/Cordoba at lat=-28.594168, lon=-60.974121
21:24:23.688 INFO - This is BlueSky adaptor version 0.1.5
21:24:23.685 INFO - Running prep_bluesky_inp.py...
21:24:23.503 INFO - Creating file metdata.csv for 2024-09-23
21:24:23.503 INFO - Creating file metdata.csv for 2024-09-22
21:24:23.502 INFO - Creating file metdata.csv for 2024-09-21
21:24:23.502 INFO - Creating file metdata.csv for 2024-09-20
21:24:23.471 INFO - Running prep_bluesky_met.py...
This is run_bluesky.sh [Fri Sep 20 21:24:23 EDT 2024]
-
- Posts: 373
- Joined: May 8th, 2019, 1:31 pm
- Registered HYSPLIT User: Yes
Re: ERROR: BlueSky module fuelbeds failed
BlueSky's fuelbed database covers the conterminous U.S., Alaska, and Canada. It will not work with a location in Argentina.
Re: ERROR: BlueSky module fuelbeds failed
Thank you so much. Previously I worked in Argentina with Burned Areas and it worked very well. I understand that it currently doesn't work anymore. Is there a product I can use for this? Thank you so much.
Re: ERROR: BlueSky module fuelbeds failed
Hello, currently the Prescribed Burn areas model in Argentina is not working, but before it worked very well and I used it. Can it be fixed? Thank you so much.