mixing of urban pollution

Post Reply
aheintze
Posts: 3
Joined: August 16th, 2019, 11:00 am
Registered HYSPLIT User: Yes

mixing of urban pollution

Post by aheintze »

I am examining PM2.5 ground level - urban pollution (cars). Can I examine mixing of such particles? If so, how?
Thanks
hyun.kim
Posts: 21
Joined: June 11th, 2020, 8:29 pm
Registered HYSPLIT User: Yes

Re: mixing of urban pollution

Post by hyun.kim »

Basically, you can put multi layers set for disperison run, but the better solution for this case could be using PARDUMP output which archives all particles' location.

Hyun
hyun.kim
Posts: 21
Joined: June 11th, 2020, 8:29 pm
Registered HYSPLIT User: Yes

Re: mixing of urban pollution

Post by hyun.kim »

You can turn on the PARDUMP output option from SETUP (Advanced-Configuration Setup-Concentration-(9) INput and output PARTICLE FILES), and PARDUMP to ASCII tool is available at

https://www.ready.noaa.gov/hysplitusersguide/S350.htm

Hyun
hyun.kim
Posts: 21
Joined: June 11th, 2020, 8:29 pm
Registered HYSPLIT User: Yes

Re: mixing of urban pollution

Post by hyun.kim »

Python version reader is also available at

https://github.com/noaa-oar-arl/monetio

Hyun
aheintze
Posts: 3
Joined: August 16th, 2019, 11:00 am
Registered HYSPLIT User: Yes

Re: mixing of urban pollution

Post by aheintze »

Thank you. I will try this.
Post Reply

Return to “10. Alternate display options”