Based on the online tutorials, and especially https://www.ready.noaa.gov/documents/Tu ... _test.html, I tried to run a concentration simulation of the emission of 14 species with gdas 1 data, at different altitudes. But it is not working.
I checked the gdas1 data repeating the tutorial of the Fukushima accident with two species https://www.ready.noaa.gov/documents/Tu ... _dose.html, but changing the meteo data (gdas1) and the date of release to 21.01.04 (start at 21.01.01 to be consistent with the tuto), and it is working.
I then tried exactly the fallout example with changing only the meteo data to gdas1 and dates to 21.01.01 but it is not working.
Then I tried keeping only one concentration grid... failed again.
And finally, I changed release time and concentration grids to those given in the Fukushima example but failed again.
In the MESSAGE file, I can read at the end:
Initial call to rdizsg to retrieve nlvl
rdizsg: zsg model levels not changed
and in the WARNING FILE:
NOTICE metini: MODEL_ID not AWRF in data (kg,kt) 1 1
Setting DREC(KG,KT)%WVERT=.FALSE. to use default vertical interpolation!
I also enclose the last CONTROL, SETUP and EMITIMES files. I added here a .txt extension to be able to attach it to the message.
Thanks by advance to whom will help me.
run with Emitimes not working
run with Emitimes not working
- Attachments
-
- SETUP.txt
- (109 Bytes) Downloaded 4464 times
-
- EMITIMES.txt
- (6.19 KiB) Downloaded 4358 times
-
- CONTROL.txt
- (2.76 KiB) Downloaded 4345 times
Re: run with Emitimes not working
I have found my mistakes which was in the control file... sorry for the useless post...
Re: run with Emitimes not working
Can you tell me what the error is?
space bar clicker
space bar clicker