How to use Convert to Station on the file cmean

General questions and postings pertaining to the use of HYSPLIT regardless of the platform. For platform specific questions, use the HYSPLIT Platform forums.
Post Reply
Mariia_Murasheva
Posts: 2
Joined: March 14th, 2022, 10:51 am
Registered HYSPLIT User: No

How to use Convert to Station on the file cmean

Post by Mariia_Murasheva »

I have been learning how to use HYSPLIT, and in the chapter 13.3 Emissions from an Unknown Locations, after estimating the source location, I want to learn how to identify the emissions. (https://www.ready.noaa.gov/documents/Tu ... _geol.html) The tutorial says "The exact value near the previously estimated source location (43N 75W) is difficult to determine from the graphic. Use Convert to Station on the file cmean to determine that the exact value is 0.584x10^-15. The inverse would be 1.7x10^15 pg/h or about 1700 g/h." How should I do this? I do not understand "use Convert to Station on the file cmean". I know Convert to Station menu, I found the file cmean in the working directory, but I do not get how I should use them together to get the value 1.7x10^15. Thanks!
Post Reply

Return to “Users”