Hello,
I'd like to ask some help with the following issue.
I'm running a simulation using the attached CONTROL, SETUP and EMITTIMES files.
In the MESSAGE file I can see that the simulation went well and all the mass has been release.
However, when I look at the cdump.txt file or I plot the results using concplot, I cannot see the mass in the domain from the beginning of the simulation.
Is there something wrong with my input files?
Here you can find all the files
https://drive.google.com/open?id=0B8a9n ... GtSaldrUms
Many thanks for any help you can give me
Regards
Federica
Check mass in the domain
-
- Posts: 660
- Joined: November 7th, 2012, 3:14 pm
- Registered HYSPLIT User: Yes
Re: Check mass in the domain
You are emitting your particles at 7153.2855 m. These particles are not mixing down. Your MESSAGE file is showing that your mass stays above 6000 m.
Index Height %Mass
30 8710.0 36.92
29 8130.0 56.67
28 7570.0 5.25
27 7030.0 1.00
26 6510.0 0.17
Try plotting the concentrations at those heights.
Index Height %Mass
30 8710.0 36.92
29 8130.0 56.67
28 7570.0 5.25
27 7030.0 1.00
26 6510.0 0.17
Try plotting the concentrations at those heights.
Re: Check mass in the domain
Thanks! The problem has been solved.
Cheers
Federica
Cheers
Federica