[Note that the question and the answer below are recreated from a HYSPLIT FAQ site that predates this forum site. The original posting date is unknown.]
Question:
After calculating backward isobaric trajectories I see that the pressure is not constant and looking at the vertical motion plot at the bottom of the plot, I see vertical motion (about 500m difference from the starting point to some other points ). Why is this?
Answer:
The isobaric (and other options) are not truly “iso –” but quasi because the motion is only approximated by computing the velocity required to maintain the parcel on the iso surface. When the next time period’s meteorological data are read in, a parcel may find itself on another surface. So the departure from “iso” is one measure of the precision of that particular trajectory (precision not accuracy, that is another issue). As to the vertical motion plot, you must be careful because the vertical scale is height above model ground level, not pressure level. So that as you are traveling along a pressure surface the distance between the ground and the trajectory endpoint will change (decrease with higher elevation and increase with lower elevation).
Glenn Rolph & Roland Draxler
After calculating backward isobaric trajectories I see that the pressure is not constant and looking at the vertical mot
Topics about the HYSPLIT trajectory model.
-
- Posts: 362
- Joined: May 8th, 2019, 1:31 pm
- Registered HYSPLIT User: Yes
Jump to
- HYSPLIT
- ↳ Users
- ↳ Developers
- ↳ Bugs
- ↳ Announce
- ↳ General Comments
- ↳ Trajectory Model
- ↳ Dispersion Model
- ↳ User Applications
- ↳ In-line WRF-HYSPLIT coupling
- HYSPLIT Platform Specific
- ↳ HYSPLIT for PCs
- ↳ HYSPLIT for Mac OS X
- ↳ HYSPLIT for LINUX
- ↳ HYSPLIT on the READY Server
- Meteorological Data
- ↳ General questions on meteorological data needed for HYSPLIT
- ↳ Conversion programs
- ↳ Repositories of HYSPLIT formatted data
- ↳ MeteoInfo Software
- HYSPLIT Research
- ↳ Volcanic Ash
- ↳ Wildfire Smoke
- ↳ Dust
- ↳ Chemicals
- ↳ Radiological
- ↳ Cluster Analysis
- HYSPLIT Workshop
- ↳ 2022 HYSPLIT Workshop Questions
- ↳ 1. Installing HYSPLIT
- ↳ 2. Testing the installation
- ↳ 3. Gridded meteorological data files
- ↳ 4. Trajectory calculations
- ↳ 5. Trajectory options
- ↳ 6. Trajectory statistics
- ↳ 7. Air concentration calculations
- ↳ 8. Configuring the CAPTEX simulation
- ↳ 9. Air concentration parameter sensitivity
- ↳ 10. Alternate display options
- ↳ 11. Pollutant transformations and deposition
- ↳ 12. Air concentration uncertainty
- ↳ 13. Source attribution methods
- ↳ 14. Wildfire smoke and dust storms
- ↳ 15. Radioactive pollutants and dose
- ↳ 16. Volcanic eruptions with gravitational settling
- ↳ 17. Custom simulations
- ↳ 2021 HYSPLIT Workshop Questions
- ↳ 1. Installing HYSPLIT
- ↳ 2. Testing the installation
- ↳ 3. Gridded meteorological data files
- ↳ 4. Trajectory calculations
- ↳ 5. Trajectory options
- ↳ 6. Trajectory statistics
- ↳ 7. Air concentration calculations
- ↳ 8. Configuring the CAPTEX simulation
- ↳ 9. Air concentration parameter sensitivity
- ↳ 10. Alternate display options
- ↳ 11. Pollutant transformations and deposition
- ↳ 12. Air concentration uncertainty
- ↳ 13. Source attribution methods
- ↳ 14. Wildfire smoke and dust storms
- ↳ 15. Radioactive pollutants and dose
- ↳ 16. Volcanic eruptions with gravitational settling
- ↳ 17. Custom simulations
- ↳ 2020 HYSPLIT Workshop Questions
- ↳ 1. Installing HYSPLIT
- ↳ 2. Testing the installation
- ↳ 3. Gridded meteorological data files
- ↳ 4. Trajectory calculations
- ↳ 5. Trajectory options
- ↳ 6. Trajectory statistics
- ↳ 7. Air concentration calculations
- ↳ 8. Configuring the CAPTEX simulation
- ↳ 9. Air concentration parameter sensitivity
- ↳ 10. Alternate display options
- ↳ 11. Pollutant transformations and deposition
- ↳ 12. Air concentration uncertainty
- ↳ 13. Source attribution methods
- ↳ 14. Wildfire smoke and dust storms
- ↳ 15. Radioactive pollutants and dose
- ↳ 16. Volcanic eruptions with gravitational settling
- ↳ 17. Custom simulations
- ↳ 2019 HYSPLIT Workshop Questions