[Note that the question and the answer below are recreated from a HYSPLIT FAQ site that predates this forum site. The original author and the posting date are unknown.]
Question: I am attempting to calculate back trajectories for event based precipitation samples to trace sources of atmospheric pollutants (mercury, nitrogen, pesiticides). I am uncertain as to what height or pressure I should use in the model. Most of the events I am trying to model are summer thundershowers. Also, my site is located in rugged mountainous terrain in Colorado at an elevation of 9500 feet.
Answer: We have two frequently asked question pages that is very similar to what you are asking. They are at:
https://www.arl.noaa.gov/backward-traje ... oast-site/
https://www.arl.noaa.gov/faq-ac6/
Generally what has been done in the past is to pick several levels near where the precipitation is formed, which is generally between 850 and 700mb. However, since your location is already at about 700mb above sea level, you will need to do some above 700mb to account for the terrain.
I am attempting to calculate back trajectories for event based precipitation samples to trace sources of atmospheric pol
Topics about the HYSPLIT trajectory model.
-
- Posts: 360
- Joined: May 8th, 2019, 1:31 pm
- Registered HYSPLIT User: Yes
Jump to
- HYSPLIT
- ↳ Users
- ↳ Developers
- ↳ Bugs
- ↳ Announce
- ↳ General Comments
- ↳ Trajectory Model
- ↳ Dispersion Model
- ↳ User Applications
- ↳ In-line WRF-HYSPLIT coupling
- HYSPLIT Platform Specific
- ↳ HYSPLIT for PCs
- ↳ HYSPLIT for Mac OS X
- ↳ HYSPLIT for LINUX
- ↳ HYSPLIT on the READY Server
- Meteorological Data
- ↳ General questions on meteorological data needed for HYSPLIT
- ↳ Conversion programs
- ↳ Repositories of HYSPLIT formatted data
- ↳ MeteoInfo Software
- HYSPLIT Research
- ↳ Volcanic Ash
- ↳ Wildfire Smoke
- ↳ Dust
- ↳ Chemicals
- ↳ Radiological
- ↳ Cluster Analysis
- HYSPLIT Workshop
- ↳ 2022 HYSPLIT Workshop Questions
- ↳ 1. Installing HYSPLIT
- ↳ 2. Testing the installation
- ↳ 3. Gridded meteorological data files
- ↳ 4. Trajectory calculations
- ↳ 5. Trajectory options
- ↳ 6. Trajectory statistics
- ↳ 7. Air concentration calculations
- ↳ 8. Configuring the CAPTEX simulation
- ↳ 9. Air concentration parameter sensitivity
- ↳ 10. Alternate display options
- ↳ 11. Pollutant transformations and deposition
- ↳ 12. Air concentration uncertainty
- ↳ 13. Source attribution methods
- ↳ 14. Wildfire smoke and dust storms
- ↳ 15. Radioactive pollutants and dose
- ↳ 16. Volcanic eruptions with gravitational settling
- ↳ 17. Custom simulations
- ↳ 2021 HYSPLIT Workshop Questions
- ↳ 1. Installing HYSPLIT
- ↳ 2. Testing the installation
- ↳ 3. Gridded meteorological data files
- ↳ 4. Trajectory calculations
- ↳ 5. Trajectory options
- ↳ 6. Trajectory statistics
- ↳ 7. Air concentration calculations
- ↳ 8. Configuring the CAPTEX simulation
- ↳ 9. Air concentration parameter sensitivity
- ↳ 10. Alternate display options
- ↳ 11. Pollutant transformations and deposition
- ↳ 12. Air concentration uncertainty
- ↳ 13. Source attribution methods
- ↳ 14. Wildfire smoke and dust storms
- ↳ 15. Radioactive pollutants and dose
- ↳ 16. Volcanic eruptions with gravitational settling
- ↳ 17. Custom simulations
- ↳ 2020 HYSPLIT Workshop Questions
- ↳ 1. Installing HYSPLIT
- ↳ 2. Testing the installation
- ↳ 3. Gridded meteorological data files
- ↳ 4. Trajectory calculations
- ↳ 5. Trajectory options
- ↳ 6. Trajectory statistics
- ↳ 7. Air concentration calculations
- ↳ 8. Configuring the CAPTEX simulation
- ↳ 9. Air concentration parameter sensitivity
- ↳ 10. Alternate display options
- ↳ 11. Pollutant transformations and deposition
- ↳ 12. Air concentration uncertainty
- ↳ 13. Source attribution methods
- ↳ 14. Wildfire smoke and dust storms
- ↳ 15. Radioactive pollutants and dose
- ↳ 16. Volcanic eruptions with gravitational settling
- ↳ 17. Custom simulations
- ↳ 2019 HYSPLIT Workshop Questions