Output Frequency < 1 Minute
-
- Posts: 3
- Joined: April 1st, 2020, 3:50 pm
- Registered HYSPLIT User: Yes
Output Frequency < 1 Minute
I'm trying to provide HYSPLIT with data (converted from wrfout files to ARL format) at each model time step, which is every 6 seconds. Is there anyway to get output for HYSPLIT trajectories every 6 seconds (or something less than 1 minute). I was able to provide it input at 1 minute intervals and get output at that frequency, but would like to do so for every timestep I have.
Re: Output Frequency < 1 Minute
The smallest time step HYSPLIT uses is one minute.
https://www.ready.noaa.gov/documents/Tu ... _eqns.html
It is not possible to output at times shorter than the smallest time step.
The code would need to be modified to use smaller time steps.
https://www.ready.noaa.gov/documents/Tu ... _eqns.html
It is not possible to output at times shorter than the smallest time step.
The code would need to be modified to use smaller time steps.
-
- Posts: 3
- Joined: April 1st, 2020, 3:50 pm
- Registered HYSPLIT User: Yes
Re: Output Frequency < 1 Minute
Thank you.