Error of ip adress

Topics about the HYSPLIT trajectory model.
Post Reply
ozcanfatm
Posts: 5
Joined: October 31st, 2017, 7:55 am
Registered HYSPLIT User: No

Error of ip adress

Post by ozcanfatm »

I am having an ip adress trouble. Even if the model did not create my results, it does not allow me to create a ner trajectory or to remake. How can I fix this?
glenn.rolph
Posts: 362
Joined: November 7th, 2012, 1:39 pm
Registered HYSPLIT User: Yes

Re: Error of ip adress

Post by glenn.rolph »

What is your IP address and what page are you trying to connect to?
ozcanfatm
Posts: 5
Joined: October 31st, 2017, 7:55 am
Registered HYSPLIT User: No

Re: Error of ip adress

Post by ozcanfatm »

I am receiving this error "Your IP address (88.236.92.235) is currently running another trajectory at this time. You must wait until this job is finished before submitting another one. This error can also occur if more than one person are sharing a hub with the same IP address and running HYSPLIT on our website."
glenn.rolph
Posts: 362
Joined: November 7th, 2012, 1:39 pm
Registered HYSPLIT User: Yes

Re: Error of ip adress

Post by glenn.rolph »

Yes, that IP address has been running trajectories this morning (about 25 times). Maybe someone else in your location is running these?
ozcanfatm
Posts: 5
Joined: October 31st, 2017, 7:55 am
Registered HYSPLIT User: No

Re: Error of ip adress

Post by ozcanfatm »

No, only I am working on HYSPLIT but I tried to run different dates and so many times. Is it because of quota or something?
glenn.rolph
Posts: 362
Joined: November 7th, 2012, 1:39 pm
Registered HYSPLIT User: Yes

Re: Error of ip adress

Post by glenn.rolph »

You can only run one trajectory at a time per IP address, so make sure the one you submit is finished completely before trying to start a new one. The limit for number of trajectory simulations per IP is 500 per day.
ozcanfatm
Posts: 5
Joined: October 31st, 2017, 7:55 am
Registered HYSPLIT User: No

Re: Error of ip adress

Post by ozcanfatm »

Allright, Is there any quota for submitting the same point? The model did not give me a result for one location for several tries, but when I try for another location it gives results.
glenn.rolph
Posts: 362
Joined: November 7th, 2012, 1:39 pm
Registered HYSPLIT User: Yes

Re: Error of ip adress

Post by glenn.rolph »

No, there is not quota for a location.
ozcanfatm
Posts: 5
Joined: October 31st, 2017, 7:55 am
Registered HYSPLIT User: No

Re: Error of ip adress

Post by ozcanfatm »

Okay, Thank you very much!
Post Reply

Return to “Trajectory Model”