Here are something I tried:
I downloaded 2D data (2m Temp, 10m U V wind, and total precipitation): Time 0h 6h 12h 18h and Step 0 3 6. I converted to ARL meteo files. However, I could not run the trajectory generation model. The error information is below:
Model started ...
HYSPLIT4 - Initialization
Last Changed Rev: 854
Last Changed Date: 2017-01-12 10:47:54 -0500 (Thu, 12 Jan 2017)
NOTICE: using namelist file
SETUP.CFG
ERROR metset: meteorological data time interval varies
Changed from 360 min to -3960 min
At day/hr 29 0
It looks like the error message shown and discussed at
viewtopic.php?f=14&t=202&p=2779#p2779 is still present. I did not know the reason why I failed. I displayed the data text and showed that the data are in 12h interval.
METEOROLOGICAL PROFILE LISTING ...
Meteorological Profile: ERA.nov16.w4
File start time : 16 11 22 0 0
File ending time: 16 11 28 18 0
___________________________________________________
Profile Time: 16 11 22 0 0
Used Nearest Grid Point ( 181, 91) to Lat: 0.00, Lon: 179.50
2D Fields
SHGT U10M V10M T02M WDIR WSPD
m m/s m/s oC deg m/s
1013 0 -5.5 -1.4 27.2 76.2 5.7
3D Fields
HGTS TEMP UWND VWND WWND RELH TPOT WDIR WSPD
m oC m/s m/s mb/h % oK deg m/s
1000 64.0 25.1 -6.0 -1.4 -0.51 72.9 298.3 76.6 6.1
975 286 22.8 -6.3 -1.5 0.34 79.9 298.2 77.0 6.5
950 513 20.8 -6.5 -1.4 0.77 88.8 298.3 77.7 6.7
925 744 19.7 -6.6 -1.2 1.3 88.1 299.5 79.9 6.7
900 981 18.4 -6.3 -1.2 1.4 90.1 300.4 79.3 6.5
875 1223 18.5 -5.4 -2.0 0.66 61.6 303.0 70.0 5.7
850 1472 19.6 -4.4 -3.2 0.76 34.6 306.7 53.8 5.4
825 1728 19.4 -3.3 -3.7 0.78 25.8 309.1 42.4 5.0
800 1992 18.1 -3.0 -3.4 0.94 22.7 310.5 41.6 4.5
775 2263 16.8 -2.6 -3.0 0.71 22.9 311.9 40.8 4.0
750 2541 15.3 -2.0 -2.9 0 22.3 313.2 35.3 3.5
700 3122 11.9 -0.85 -2.9 0 26.1 315.7 16.3 3.0
650 3737 7.9 0.66 -2.9 0 30.8 317.9 347.1 3.0
600 4393 3.9 1.5 -2.1 0 33.3 320.7 324.3 2.6
550 5095 0.37 1.6 -2.0 0 26.9 324.5 321.4 2.5
500 5853 -3.9 1.4 -1.2 1.8 27.0 328.3 309.9 1.9
450 6677 -8.8 0.98 3.9 1.5 32.5 332.2 194.1 4.0
400 7582 -13.2 2.0 8.2 2.0 15.9 337.8 193.9 8.5
350 8587 -19.2 2.4 8.5 4.2 14.3 342.9 195.7 8.9
300 9715 -27.8 1.7 9.3 2.7 11.5 346.3 190.6 9.4
250 10995 -38.8 2.6 8.9 0.18 21.0 348.4 196.2 9.3
225 11708 -45.4 3.8 7.9 0.34 43.6 349.0 205.4 8.8
200 12483 -52.5 4.5 7.6 0.67 68.9 349.7 210.8 8.9
175 13330 -60.1 5.4 9.3 0.17 93.0 350.8 210.2 10.7
150 14273 -68.2 6.2 12.3 -0.48 98.2 352.6 206.7 13.8
___________________________________________________
Profile Time: 16 11 22 12 0
Used Nearest Grid Point ( 181, 91) to Lat: 0.00, Lon: 179.50
2D Fields
SHGT U10M V10M T02M WDIR WSPD
m m/s m/s oC deg m/s
1013 0 -7.0 -0.18 26.6 88.5 7.0
3D Fields
HGTS TEMP UWND VWND WWND RELH TPOT WDIR WSPD
m oC m/s m/s mb/h % oK deg m/s
1000 74.0 25.8 -7.7 -0.26 0 67.4 299.0 88.1 7.7
975 297 23.7 -8.0 0 0.40 74.2 299.0 90.0 8.0
950 523 21.5 -8.0 0 0.92 80.5 299.0 90.0 8.0
925 755 19.7 -8.0 0.28 1.1 82.4 299.5 92.0 8.0
900 991 18.1 -7.3 0.29 0.73 85.8 300.2 92.2 7.3
875 1232 17.0 -6.8 0.28 0 78.4 301.4 92.3 6.8
850 1481 18.2 -6.4 0.38 -1.8 46.7 305.2 93.4 6.4
825 1736 19.1 -5.1 1.1 -2.6 22.9 308.8 102.6 5.2
800 2000 18.3 -4.1 0.66 -2.3 21.9 310.6 99.3 4.1
775 2271 17.0 -3.5 0 -3.2 22.5 312.1 90.0 3.5
750 2549 15.5 -2.8 -0.62 -2.6 23.5 313.4 77.6 2.9
700 3130 12.0 -1.7 -2.1 -3.1 27.3 315.8 39.0 2.8
650 3746 8.1 -0.17 -3.0 -3.4 33.0 318.1 3.3 3.0
600 4402 3.9 1.3 -2.2 -3.6 32.1 320.7 329.0 2.5
550 5103 -4E-2 3.0 -1.7 -4.0 26.0 324.0 300.1 3.4
500 5860 -4.6 4.2 -1.6 -3.6 25.2 327.5 290.8 4.5
450 6680 -10.1 4.1 0.91 -2.0 38.0 330.6 257.5 4.2
400 7580 -14.7 4.9 4.9 -1.2 32.0 335.9 224.8 6.9
350 8580 -20.4 3.7 7.7 -0.96 24.6 341.3 205.5 8.5
300 9702 -28.9 1.3 13.2 -1.4 31.8 344.7 185.6 13.3
250 10979 -39.4 4.7 11.5 -1.2 69.0 347.6 202.1 12.4
225 11691 -45.6 5.5 8.2 -0.15 78.6 348.7 213.7 9.9
200 12466 -52.4 4.1 8.6 0.77 58.9 349.9 205.6 9.5
175 13314 -59.7 3.1 11.8 1.7 50.0 351.4 194.9 12.2
150 14258 -67.9 5.8 14.7 2.3 84.1 353.2 201.7 15.8
I also tried downloading time 0h 6h 12h 18h and step 0 and 12. However, it still could not work with the same error information. Any caveat or thread?
Thanks,
Ryan