HYSPLIT Forum: hysplitbbs.arl.noaa.gov

I tried to simulate the example in the Section 15.2 of tutorial , my control file and setup file and station file are shown below:
CONTROL
11 03 14 00
1
37.4206 141.0329 100.0
196
0
10000.0
1
C:/Users/PARSIAN/Desktop/2/
RP201103.bin
1
I131
5.0E+15
24.0
11 03 14 12 00
1
0.0 0.0
1.0 1.0
181.0 360.0
./
fukushima.bin
1
500
00 00 00 00 00
00 00 00 00 00
00 24 00
1
0.0 0.0 0.0
0.01 0.0 0.0 0.0 0.0
3.00 0.0 0.0
8.00
0.0

&SETUP
delt = 30.0,
initd = 0,
numpar = 24000,
maxpar = 25000,
/

DHAK 53.9 -166.5

but con2stn.txt is not the same as the Dutch_Harbor.txt
Please advise me
Thanks

Make sure you are correctly specifying the concentration multiplier (1000.0) in the time series extraction GUI (attached) as this may default to 1.0E+12.

How different is your graph from the one in the Tutorial? Attach your fukushima1.txt and timeplot.ps if possible.

Thanks for your advice

Thanks for your advice

Are you running version 854 of HYSPLIT which was used for this tutorial? You can see the version number in the MESSAGE file. Otherwise, I see no obvious issues.

Sorry, I USE version 802 of HYSPLIT

I suggest you update to the latest version and try again.

Thanks a lot.

I updated to the latest version and tried again process but I received the previous fukushima1.txt result.

I found out that the control files in the tutorial are not true Completely, but by fallowing the steps In the tutorial I made a true control file.