Dear collegues,
I am adaptating the tutorial "smoky nuclear test" (https://www.ready.noaa.gov/documents/Tu ... _test.html) to other meteorological files. I wrote the CONTROL, SETUP and EMITIMES files. However remaining the emission rates to 0 in the CONTROL file, lead me to concentrations of zeros in the output. Changing these rates give non null results. However, I have read on the tutorial that if not set to 0, the emission rate taken into account might be those from the CONTROL file and not the EMITIMES. What should I do then?
Maybe the mistake is somewhere else...
I attached the CONTROL and SETUP files.
I hope that someone will be able to help me.
emission rate (CONTROL) and EMITIMES file
emission rate (CONTROL) and EMITIMES file
- Attachments
-
- SETUP.txt
- (160 Bytes) Downloaded 15452 times
-
- CONTROL.txt
- (2.79 KiB) Downloaded 15376 times
Re: emission rate (CONTROL) and EMITIMES file
Yes, if you are using an emit-times file then we recommend setting the emission rates in the CONTROL file to 0.
If you are getting no concentrations then your emit-times file either isn't being read or isn't setup properly.
If you look at the message file, you should see a line which indicates that it found and opened the emit-times file.
If you are still having trouble please also attach your message file and EMITIMES file.
If you are getting no concentrations then your emit-times file either isn't being read or isn't setup properly.
If you look at the message file, you should see a line which indicates that it found and opened the emit-times file.
If you are still having trouble please also attach your message file and EMITIMES file.