hello
There is a question for me. Whether the HYSPLIT model is suitable for convective dust storms?
For example, dust storms, which eventually takes about an hour!
dust storm
-
- Posts: 660
- Joined: November 7th, 2012, 3:14 pm
- Registered HYSPLIT User: Yes
Re: dust storm
In principle the model can do it. However, you need to be very careful with the data (meteorological and emissions) that you use to simulate your case. In these links http://ready.arl.noaa.gov/documents/Tut ... _dust.html and http://www.arl.noaa.gov/HYSPLIT_dust.php you can find some basic information about running the dust module within HYSPLIT and how the model is applied to forecast dust in the western US.
You will certainly need to generate meteorological fields (e.g. using WRF model) with a time resolution of the order of minutes for this kind of application.
You will certainly need to generate meteorological fields (e.g. using WRF model) with a time resolution of the order of minutes for this kind of application.
Re: dust storm
I'm running the dust storms of the HYSPLIT model by using data from WRF model, but do not obtain good output.
The output is :
http://8pic.ir/images/wx9uxkvphobfl88tds7e.png
Run the trajectory model for the dust storm, taking into account the different simulation times, the different outputs.
Is this normal?!!
The output is :
http://8pic.ir/images/wx9uxkvphobfl88tds7e.png
Run the trajectory model for the dust storm, taking into account the different simulation times, the different outputs.
Is this normal?!!
-
- Posts: 660
- Joined: November 7th, 2012, 3:14 pm
- Registered HYSPLIT User: Yes
Re: dust storm
Can you please upload the graphic?
We can not click on an external link.
We can not click on an external link.
Re: dust storm
oh! Yes
Output, the only source is marked
Output, the only source is marked
-
- Posts: 660
- Joined: November 7th, 2012, 3:14 pm
- Registered HYSPLIT User: Yes
Re: dust storm
That is because you are not emitting any particles. Are you following the instructions from our workshop example?:
http://ready.arl.noaa.gov/documents/Tut ... _dust.html
If you still have problems, please send me your CONTROL and SETUP.CFG files.
http://ready.arl.noaa.gov/documents/Tut ... _dust.html
If you still have problems, please send me your CONTROL and SETUP.CFG files.
Re: dust storm
But I am confident that the storms that occurred in that area at that time took about an hour.
I have to simulate the example,I had no problem
I have to simulate the example,I had no problem
-
- Posts: 660
- Joined: November 7th, 2012, 3:14 pm
- Registered HYSPLIT User: Yes
Re: dust storm
Yes, but probably your wind speeds were not high enough to trigger the emission of dust. Remember that the dust algorithm is based on a parameterization that depends on the threshold friction velocity and the modeled friction velocity.
Re: dust storm
Hello
I have a question.
Is the Hysplit model can show us wind speed of dust storms along the trajectory?
I have a question.
Is the Hysplit model can show us wind speed of dust storms along the trajectory?