Page 1 of 1
HRRRv1 Display Data Text Profile problem
Posted: July 28th, 2021, 5:25 pm
by davidglenn
I am able to use HRRR v1 files to simulate dispersion--no problem. But I also want to obtain the meteorological data used. When I step through: Meteorology-Display Data-Text Profile, the error message: could not read "{F:/HRRR files}/hysplit.20190321.06z.hrrra": no such file or directory. The file is correct. What am I doing wrong? Thanks in advance for your time. David
Re: HRRRv1 Display Data Text Profile problem
Posted: July 29th, 2021, 6:30 am
by sonny.zinn
Is there a space in the "HRRR files" directory name? If so, that might have caused the error.
Re: HRRRv1 Display Data Text Profile problem
Posted: July 29th, 2021, 9:19 am
by davidglenn
That was the problem. Many thanks. It is odd that the CONCENTRATION side of HYSPLIT could read the directory but the METEOROLOGY side could not. Anyway, problem solved and thanks again for the prompt reply. David
Re: HRRRv1 Display Data Text Profile problem
Posted: July 29th, 2021, 10:07 am
by davidglenn
I spoke too soon. Initially I opened one HRRR file and it contained the 6 hours of meteo data as expected. However, when I tried to open additional HRRR files I had this error: AND now I can't get any HRRR files to Display Data to 'profile'. I've reset HYSPLIT w/o benefit.
Very bizarre. Any help is greatly appreciated. David
ERROR metset: meteorological data time interval varies. Check input meteo file.
Changed from 60 min to 120 min
At day/hr 3 4
23
ERROR metset: meteorological data time interval varies. Check input meteo file.
Changed from 60 min to 120 min
At day/hr 3 4
23
while executing
"exec $exec_dir/profile.exe $arg1 $arg2 $arg3 $arg4 $arg5 $arg6 $arg7"
(procedure "run_prof" line 27)
invoked from within
"run_prof $gdir $gbase"
invoked from within
".profplot.bot.save invoke"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke]"
(procedure "tk::ButtonUp" line 24)
invoked from within
"tk::ButtonUp .profplot.bot.save"
(command bound to event)
Re: HRRRv1 Display Data Text Profile problem
Posted: July 29th, 2021, 1:33 pm
by davidglenn
Some additional information that doesn't make sense. This file is properly read my both the METEOROLOGY and CONCENTRATION routines:
"F:\HRRR_files\hysplit.20190321.00z.hrrra"
This file is not. Both were downloaded from the same FTP server at the same time. I have found grouping of files for 2019 that will and will not input correctly. Any suggestions on a remedy are greatly appreciated. David
"F:\HRRR_files\hysplit.20190203.00z.hrrra"
ERROR metset: meteorological data time interval varies. Check input meteo file.
Changed from 60 min to 120 min
At day/hr 3 4
23
ERROR metset: meteorological data time interval varies. Check input meteo file.
Changed from 60 min to 120 min
At day/hr 3 4
23
while executing
"exec $exec_dir/profile.exe $arg1 $arg2 $arg3 $arg4 $arg5 $arg6 $arg7"
(procedure "run_prof" line 27)
invoked from within
"run_prof $gdir $gbase"
invoked from within
".profplot.bot.save invoke"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke]"
(procedure "tk::ButtonUp" line 24)
invoked from within
"tk::ButtonUp .profplot.bot.save"
(command bound to event)