Plotting Multiple Cases on One Map
Posted: April 5th, 2016, 7:28 pm
Hi,
I'm having some difficulties plotting trajectories across multiple dates on one map. Following the HYSPLIT 4 User Guide, when running the trajectory from the command line I should be able to add the tag to plot all of the trajectories from that list on the one figure. In my directory, I have saved all of my files as YYYYMMDD, and use -i as the user guide suggests. However, it appears that the code is not capable of running this way. Any ideas for why the graphic comes out looking messed up? See below for code and output. Thanks for any help you can provide!
Final Graphic: http://d.pr/i/DHkM
Trajectory Code:
CONTROL:
Output:
I'm having some difficulties plotting trajectories across multiple dates on one map. Following the HYSPLIT 4 User Guide, when running the trajectory from the command line I should be able to add the tag
Code: Select all
-i[Input files: name1+name2+name3+... or +listfile or (tdump)]
Final Graphic: http://d.pr/i/DHkM
Trajectory Code:
Code: Select all
${HYSP}/trunk/exec/trajplot -l12 -v0 -z50 -j${HYSP}/trunk/graphics/arlmap -i19790724+19800531+19800805+19810510+19810608+19810716+19810826+19820507+19820702+19820806+19830614+19830822+19840520+19840608+19840703+19850511+19850718+19860604+19860628+19870520+19870701+19870804+19880713+19880804+19890519+19890714+19890820+19900711+19900817+19910517+19910803+19910831+19920616+19920702+19920825+19930501+19930530+19930809+19940605+19940804+19940826+19950626+19960717+19970525+19970617+19970720+19970812+19980605+19980722+19980820+19990504+19990604+19990627+19990806+20000614+20010518+20010718+20020605+20030606+20030623+20030707+20030830+20040513+20040611+20040704+20040729+20040824+20050512+20050605+20050718+20050812+20060802+20070527+20070804+20080524+20080625+20080829+20090608+20090709+20100704+20100831+20110513+20110615+20120831+20130520+20130621+20130802+20140511+20140601+20140807
Code: Select all
05 07 18 18
10
37.50 -92.50 50
40.00 -97.50 50
40.00 -93.50 50
40.00 -87.50 50
40.00 -82.50 50
42.50 -100.00 50
42.50 -92.50 50
45.00 -102.50 50
45.00 -97.50 50
47.50 -95.00 50
-240
0
10000.0
1
./
output.dat
./
20050718
Output:
Code: Select all
HYSPLIT4 - Initialization
Last Changed Rev: 677
Last Changed Date: 2014-11-12 15:18:23 +0000 (Wed, 12 Nov 2014)
NOTICE: using namelist file SETUP.CFG
Calculation Started ... please be patient
Percent complete: 0.4
Percent complete: 0.8
Percent complete: 1.3
Percent complete: 1.7
Percent complete: 2.1
Percent complete: 2.5
ngrd,k1,k2,ntim,jet: 1 1 0 1 60273360
Percent complete: 10.0
Percent complete: 20.0
Percent complete: 30.0
Percent complete: 40.0
Percent complete: 50.0
Percent complete: 60.0
Percent complete: 70.0
Percent complete: 80.0
Percent complete: 90.0
Percent complete: 100.0
Complete Hysplit
Started Trajectory Drawing
Last Changed Rev: 677
Last Changed Date: 2014-11-12 15:18:23 +0000 (Wed, 12 Nov 2014)
Processing: 19790724
Processing: 19800531
Processing: 19800805
Processing: 19810510
Processing: 19810608
Processing: 19810716
Processing: 19810826
Processing: 19820507
Complete Trajplot [\code]