Page 1 of 1

Execute Display quantity with gsview concentration in hysplit

Posted: February 28th, 2020, 4:35 am
by Reley
When I use the concentration module to simulate the particle diffusion concentration, only one picture will be displayed with gsview at last, while in my model, output files will be displayed every three hours, that is, multiple pictures. Can anyone tell me why? Thank you.Like the following picture.
捕获2.PNG
捕获.PNG

Re: Execute Display quantity with gsview concentration in hysplit

Posted: March 2nd, 2020, 8:43 am
by barbara.stunder
You can set the HYSPLIT output averaging time in the CONTROL file. See the Basic Tutorial at https://www.ready.noaa.gov/HYSPLIT_Tutorials.php, particularly Section 8.1.

Re: Execute Display quantity with gsview concentration in hysplit

Posted: March 3rd, 2020, 3:08 am
by Reley
I just follow the tutorial (https://ready.arl.noaa.gov/documents/Vi ... c_cexp.mp4) method. The specific settings in the control file are as follows. Does gsview 5.0 need to register to display multiple images?
1.1.PNG
1.1.PNG (7.85 KiB) Viewed 1714 times
1.2.PNG

Re: Execute Display quantity with gsview concentration in hysplit

Posted: March 9th, 2020, 8:06 am
by barbara.stunder
This shows you have a 3-h emission and output every 3 hours. How long is your run? If it is 3 hours, there will be one map, If it is for example 12 hours, there should be 4 maps.